Hi.
We are testing RAID 1 on Windows server 2016.
We have followed this guide:
https://www.wintips.org/how-to-mirror-boot-hard-drive-on-windows-10-legacy-or-uefi/#case-b
Now the thing is, after you set the same ID on the second/shadow disk's Recovery partition as it is on first/primary disk you get boot pop-up menu each time when server reboots and you need to manually choose either Window Server or secondary plex. What are the best practices to skip this menu and let the system decides which disk in soft RAID1 will it take?
With best regards
bostjanc